Products
Pre-Engineered Buildings
Swastik Metcon projects is specialized in manufacturing and erection of pre-engineered buildings (PEB) made in steel. Our pre-engineered buildings (PEB) are designed and manufactured with a customized design to be fabricated using various materials and methods to satisfy a wide range of structural and aesthetic design requirements of our clients.
Application Codes
- Welding is designed in accordance with : Structure Welding Code-Steel Manual 2008 AWS D.1.1:2008
- Wind Speed is applied in accordance with : IS 875 (Part3) : 2015 Code for Practice for Design.
- Cold Formed members are designed in accordance with :1996 Edition of Cold Formed Steel Design Manual, American Iron & Steel Institute (AISI).
- Hot rolled Section & Built up Sections are Designed in accordance with :1989 Manual of steel construction, Allowable stress Design, American Iron & steel Institute const (AISC).
- Design for seismic loads, collateral loads or any other local conditions must be specified at that time of enquiry.
- Loads are applied in accordance with the latest American codes & standards applicable to pre-engineered buildings unless otherwise requested at the time of Enquiry
Design load considerations
- Dead Load : 0.11 KN/M2
- Live Load : 0.50-0.75 KN/M2
- Wind Load : As per IS 875:2015 (Part) 3 for location, for Aurangabad 39M/Sec.
- Roof Slope : 1 : 10
- BaYSpacing : 6M & 7.5M are most common.
- Eaves Height : 4.00 Mt. To 12.00 Mt. from FFL Level to Top of Eaves Strut.
Material specification for various components
|
No |
Components |
Specifications |
Minimum Yield Strength |
|
1 |
Primary Members Built up Frames/Portal Frames |
ASTM A- 572 Grade 50 (or Equivalent ) |
YS= 345 MPa |
|
2 |
Secondary Members Cold Formed HR Steel ,Galvanized Steel |
ASTM A- 570 or IS 1079/10748 ASTM A- 653 MSS Gr. 34 Mpa (Coating 120 GSM) |
VS = 245 MPa YS = 345 MPa |
|
3 |
Roof/Wall Sheeting & Panels Bare & Colour Coated |
ASTM A- 792 Grade D AZ 150 |
YS = 345 or 550 MPa |
|
4 |
Mezzanine Deck Panels Galvanized Sheet |
ASTM A- 653 SS Gr. 55, (Zinc Coating 120 GSM) |
VS= 550 MPa |
|
5 |
Roof/Wall Bracings Rod round bar |
ASTM A- 36M / IS 2062 (or Equivalent) |
YS= 245 MPa |
|
6 |
Anchor Bolts |
ASTM A- 36M / IS 2062 (or Equivalent) |
YS= 245 MPa |
|
7 |
Galvanized M S Bolts |
ASTM A- 307 / IS 1367 (or Equivalent) Grade 4.6 hot dip Galvanized / plating yellow colour |
YS= 245 MPa |
|
8 |
High Strength Bolts For Rafter |
ASTM A- 325 Type Gr. 8.8 (or Equivalent) |
UTS 830 MPa |
|
9 |
Valley Gutter |
IS 513 Grade 0 or D |
YS= 240 MPa |